EVID 2WAY TWIN 6"" 70V 30W BLK(PR PRICE) - Pierrot's Variety Store Store

EVID 2WAY TWIN 6"" 70V 30W BLK(PR PRICE) 2-Way Twin 6IN Surface Mount Speaker System 70V 30W Blk(Pr Price)

Comprised of dual 6-inch LF drivers & a 1-inch Ti/waveguide, the EVID 6.2 is perfect for applications that require exemplary audio & the capability to fill large areas w/sound. Additionally, the flexible Strong-Arm-MountT (SAMT) system provides the versatility to accommodate any installation challenge. EV's unique 6-inch dual woofer design delivers crisp & clean program for the uTost in listening experience regardless of the location. Great for larger areas that demand higher SPL levels, the 6.2 delivers the outstanding, full bass output required for shopping malls, stadiums, airports, etc.
* Line-array enhanced coverage control
* Organic, unobtrusive shape
* Strong-Arm-MountT for easy, flexible aiming
* Full-bandwidth overload protection
* Weather resistant - Conforms to Mil Spec 810 & IEC 529 IP 34
* Dual 6-inch LF transducers for extended bass & greater power handling & output
* Ti direct-radiator HF transducer, Neodymium structure
* High sensitivity
* Magnetically shielded
* Zinc-plated grilles
* Transformer Version with
taps @ the following:
70 Volt: 7.5 Watt
70 Volt/100 Volt: 15 Watt, 30 Watt, 60 Watt

The loudspeaker shall be a two-way system consisting of two 6"" (152mm)
low-frequency transducers, a 1"" (25mm) high-frequency transducer with
a Coherent Coverage Waveguide, & a frequency-dividing network
installed in a vented, line-array enclosure. The network shall include a
passive limiter for both the low-frequency & high-frequency transducers.
The loudspeaker system shall meet the following performance criteria:
Power handling, 150-Watts of EIA RS-426A continuous pink noise (6 dB
crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated
sensitivity); Pressure sensitivity, 94 dB @ one watt, 200 Hz -10 kHz @ one
meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency
transducer shall drive a waveguide to cover evenly 100 horizontally by
90 vertically. The enclosure shall be molded of acrylic butyl styrene. The
enclosure shall be 16.5"" (419mm) high, 9"" (228mm) wide, 11.75""
(298mm) deep. The finish shall be a paintable black or white. The grille
shall be zinc plated, powder coated for corrosion resistance, and
restrained w/a safety leash. The loudspeaker shall be adjustable over
a range of 100 horizontally & 90 vertically. The support bracket shall
be low profile & integral w/the enclosure. The system shall be weather
resistant to MIL Spec 810 & IEC 529 IP 34 test conditions. The surface
mount loudspeaker shall be the Electro-Voicer EVID model 6.2.

What other customers are saying: